AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Stm32 bootloader driver for mac1/24/2024 ![]() ![]() ![]() Currently, RP2040 is used on the following Keebio PCBs:.Found on RP2040-based keyboards/controllers, such as the Elite-Pi and Sinc Rev.Found on Arduino Pro Micro controllers, so if you've built a board with a Pro Micro, you have the Caterina Bootloader.Currently, STM32 is used on the following Keebio PCBs:.This bootloader is on STM32-based keyboards.This bootloader is the one present on most Keebio PCBs that already have a microcontroller pre-soldered onto it.ATmega32u4 DFU Bootloader (most common).Here's the different possible bootloaders in use for Keebio boards: It's important to know what bootloader is present on your board, as the flashing procedure varies based on what you have. A bootloader is a program on the microcontroller that allows firmware to be uploaded to the microcontroller via USB. Determining Bootloader īefore flashing, you'll need to know what bootloader is present on the microcontroller that's on your PCB. ![]() While there are multiple methods of flashing, this guide with only address the usage of QMK Toolbox to perform flashing. This might be a good practice to be sure you're starting out with gear that will perform as desired. You can flash the microcontrollers (ATmega32u4, Pro Micro, Elite-C, etc) in your kit prior to building your keyboard to ensure that they are undamaged and functioning normally. ![]()
0 Comments
Read More
Leave a Reply. |